Concrete Driveways Arthur, ND 58006

Concrete in Arthur, ND (58006) · Local Professionals

Fargo Concrete · Fast response in Arthur and the Fargo area · Free estimate 24h

✅ Insured Contractor 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm

+157Verified Reviews

10Years in Business

4.9 ★Google Rating

24/7Available

Arthur, North Dakota is farm country, and that means long driveways, big shop slabs, and concrete that has to stand up to prairie winters and hard freezes. Fargo Concrete knows Arthur's terrain and climate, and we've built and repaired driveways, slabs and foundations across 58006 for years.

When your driveway cracks, settles or heaves, or when your shop slab starts to spall under salt and freeze-thaw cycles, you need a concrete contractor who understands Fargo clay and the Red River Valley. That's us.

Concrete in Arthur (58006)

Arthur sits on the same heavy, poorly drained Fargo clay as the rest of the valley. That clay shrinks and swells with moisture, and it heaves when frost goes deep in winter. Your driveway or shop slab will crack and settle unless we build it right: compacted granular base, proper reinforcement, tight jointing, and air-entrained concrete to survive the freeze-thaw cycles. Spring and fall bring the worst damage. Winter de-icing salt scales unsealed concrete fast, so sealing matters more here than in warmer climates.

Long farm driveways and wide shop slabs are common in Arthur. Lot access can be tight, and drainage has to work hard in a flat landscape. We've handled all of it. Our team knows the local soil, the frost depth, the permit process, and the seasonal window for pouring (May through October is best). We show up on time, do the work right, and leave your property clean.

Our services in Arthur

Concrete Driveways in Arthur · New concrete driveway installation and full driveway replacement built to last…
Concrete Patios in Arthur · Custom concrete patios that expand your outdoor living space and add lasting…
Stamped & Decorative Concrete in Arthur · Stamped, stained, and exposed aggregate finishes that replicate stone, brick…
Concrete Repair & Resurfacing in Arthur · Repair of cracked, spalling, or worn concrete and full resurfacing to restore…
Concrete Leveling & Slab Lifting in Arthur · Lifting and leveling of sunken or uneven concrete driveways, patios…
Concrete Slabs & Foundations in Arthur · Poured concrete slabs and footings for garages, sheds, room additions…
Sidewalks, Walkways & Steps in Arthur · New and replacement sidewalks, walkways, and steps…
Concrete Pool Decks in Arthur · Slip-resistant pool decks in broom, textured…
Concrete Sealing in Arthur · Professional sealing that protects concrete from stains, moisture…
Concrete Removal & Replacement in Arthur · Full tear-out and haul-away of old, cracked…
Garage Floors in Arthur · Poured and finished concrete garage floor slabs for new builds, replacements…
Polished Concrete in Arthur · Mechanically ground and polished concrete floors with a smooth…

How a Job Works in Arthur

We start with a free on-site assessment. You call us at (701) 515-9251, describe the problem, and we come out to look. We measure, check drainage and access, talk about what you want, and give you a straight estimate with no surprises.

Once you approve, we handle permits if Arthur requires them (we know the city's rules). We prepare the site, set forms, compact the base, and pour. For driveways and slabs in Arthur, we pay close attention to grade and slope so water runs off and doesn't pool. We use air-entrained mixes and proper jointing to fight freeze-thaw damage. If the lot is tight or the driveway long, we plan access and logistics ahead of time.

After the concrete cures, we strip forms, clean up debris, and walk through the finished job with you. Your property is left ready to use and looking professional.

Concrete Driveways in Arthur typically run 6 dollars per square foot and up, depending on size, base prep, and whether you want decorative scoring or sealing. A 500-square-foot driveway (common for farm properties) runs roughly 3,000 to 3,500 dollars. Shop slabs and foundations start at 5 dollars per square foot for basic work. Concrete repair and resurfacing (patching cracks or leveling sunken slabs) runs 3 to 4 dollars per square foot. Stamped or decorative finishes cost more, starting at 10 dollars per square foot. Sealing, which we strongly recommend for Arthur's climate, runs 0.75 dollars per square foot and extends the life of your concrete by years. Cost depends on the size of the job, site access, how much prep work the base needs, and how soon you need it done. Call us at (701) 515-9251 for a free estimate tailored to your property and timeline.

Why does my driveway crack and heave so much in Arthur?

Fargo clay is heavy and holds water. When it freezes deep in winter, it expands and pushes your concrete up. Spring thaw leaves voids underneath, and the slab settles unevenly. Add de-icing salt and repeated freeze-thaw cycles, and cracks grow fast. We prevent this by building a solid compacted granular base, using air-entrained concrete, and sealing the surface to keep salt and water out. Proper jointing also lets the concrete move without cracking.

My driveway has cracked and settled. Can you fix it without tearing it out?

Sometimes, yes. If the settled section is small or the cracks are surface-level, we can resurface or seal. If the slab has heaved badly or settled more than an inch, we may recommend leveling and lifting (we pump polyurethane foam under the slab to raise it back) or, if it's too far gone, removal and replacement. Call us at (701) 515-9251 and we'll assess it on-site and tell you what makes sense.

How much does a typical driveway cost in Arthur?

A standard 500-square-foot residential driveway runs about 3,000 to 3,500 dollars at 6 dollars per square foot, with a solid base and proper jointing. Larger farm driveways (800 to 1,200 square feet) cost 4,800 to 7,200 dollars. If you want stamped or colored concrete, add 4 to 5 dollars per square foot. Sealing after one year adds about 400 to 600 dollars for a typical driveway. Site prep, access, and soil conditions can shift the price. We give free estimates, so call (701) 515-9251 and we'll quote your specific job.

Does Arthur require a permit for a new driveway or driveway replacement?

Arthur and surrounding Fargo-area municipalities often require permits for new driveways and curb cuts, especially if your driveway touches the right-of-way. Setback and width limits apply too. We're familiar with local requirements and can advise you during the initial consultation. In some cases, the city inspects the base and the finished pour. We handle coordination with the city and make sure the job meets code.

My property is part of a farm complex with a long driveway and a shop slab. Do I need HOA approval?

Most farm properties in Arthur are not in HOAs, but if yours is, yes, you may need approval before we start. We recommend checking your HOA documents or contacting the HOA board before you call us. If there are property-line questions or shared driveways, we can help you understand what's yours and what might be a neighbor's responsibility. Bring a survey if you have one. We always respect property lines and local rules.

Are you fully insured for concrete work at my Arthur property?

Yes. Fargo Concrete carries full general liability and workers' compensation insurance. We protect your property and our crew on every job. You can ask for a certificate of insurance before we start work. North Dakota law requires concrete contractors to carry workers' compensation, and we do.

When should I seal my new driveway, and how often?

We recommend sealing new concrete after one year, once it has fully cured and hardened. In Arthur's harsh climate, with heavy salt use and deep freeze-thaw cycles, seal every two to three years after that. Spring is the best time, after the last frost and before summer heat. Sealing costs about 0.75 dollars per square foot and cuts salt damage, spalling, and crack growth significantly. It also keeps your concrete looking newer longer. We offer sealing as a standalone service, so call (701) 515-9251 to schedule.